Caleffi solar iSolar DL3, Manual

Page: 13 / 16

en
13
6 Firmware update with SD card
New fi rmware versions extend the functional range
and enhance the operation.
In order to run a fi rmware update over the SD mem-
ory card slot, proceed as follows:
Î Format the SD card using the FAT 32 format.
Î Insert the SD card into an external SD card slot
and create a folder named „DL3“.
Î Copy the fi rmware update fi le into the folder cre-
ated before and extract if necessary.
Î Remove the SD card from the external SD card
slot.
Î Insert the SD card into the SD card slot of the
DL3.
The operating control LED starts fl ashing and the
message Do not remove SD card! appears. Wait until
the operating control LED is permanently green.
The fi rmware update is being run.
When the fi rmware update is completed, the DL3 au-
tomatically reboots.
7 Data export
There are 2 different ways to export logged data from
the iSolar DL3:
1. Export logged data onto an SD memory card. The
data are stored as a VBus
®
format fi le and can be
read out on a computer using the ServiceCenter
software.
2. Export logged data onto a computer over the
web interface. Different fi le formats can be se-
lected.
7.1 Data export over SD card
In order to copy data onto an SD card, proceed as
follows:
Î Insert the SD card into the SD card slot
The operating control LED fl ashes (green):
The card has been recognised and data are being
transferred.
The operating control LED is permanently green:
The transfer is completed. The card can be removed.
8 Accessories
Temperature sensors
The product range includes high-precision platinum
temperature sensors, fl atscrew sensors, outdoor
temperature sensors, indoor temperature sensors,
cylindrical clip-on sensors, also as complete sensors
with immersion sleeve.
Sensor / VBus
®
extension cable,
100 m coil
Art. no.: 280 051 00
SD card
Art. no.: 180 007 40
9 Spare parts
Mains adapter 100 ... 240 V~ (12 V , 1A max)
Art. no.: 720 004 60
VBus
®
cable, 1.50 m
Art. no.: 750 012 15
USB cable with 5-pole port
Art. no.: 750 000 92