60
CARE OF THE EXTERIOR
SPA SHELL
Your
CALDERA
spa has an acrylic shell. Stains and dirt generally will not adhere to your spa’s surface. A soft rag or a nylon scrubber should easily remove most dirt.
Most household chemicals are harmful to your spa’s shell (see below for detailed information on cleaning agents). Always rinse off any spa shell cleaning agent with
fresh water.
IMPORTANT:
1. The following products are the ONLY approved cleaning agents for your
CALDERA
spa shell: plain water,
CALDERA
Spa Shine, Brillianize
®
or Soft Scrub
®
. The
use of alcohol or any other household cleaner other than those listed to clean the spa shell surface is NOT recommended. DO NOT use any cleaning products
containing abrasives or solvents since they may damage the shell surface, specifically: Simple Green
®
, Windex
®
or Spa Mitt. NEVER USE HARSH CHEMICALS!
Damage to the shell by use of harsh chemicals is not covered under the warranty. Always rinse off any spa shell cleaning agent with fresh water.
2. Iron and copper in the water can stain the spa shell if allowed to go unchecked. Ask your
CALDERA
dealer about a Stain and Scale Inhibitor to use if your spa has
a high concentration of dissolved minerals. (Watkins recommends Stain & Scale Defense.)
3. Keep all cleaners out of the reach of children and use care when applying.
SPA SKIRT
When cleaning the skirt of your spa, use only a soft cloth or sponge with a mild soap and water solution. The use of an abrasive type cleaner or applicator will be harmful
to the exterior finish. Always thoroughly rinse off the spa skirt with fresh water.
CARE OF THE SPA COVER
WARNING:
The cover is a manual safety cover that meets or exceeds all prevailing requirements of ASTM Standards for spa safety covers when installed and used
correctly as of the date of manufacture. Non-secured or improperly secured covers are a hazard. Open the cover to its fully open position before use.
VINYL COVER
The vinyl spa cover is an attractive, durable foam insulation product. Monthly cleaning and conditioning are recommended to maintain its beauty.
TO CLEAN AND CONDITION THE VINYL COVER:
1. Remove the cover from the spa and gently lean it against a wall or fence.
2. With a garden hose, spray the cover to loosen and rinse away dirt or debris.
3. Using a large sponge and/or a soft bristle brush, and using a very mild soap solution (one teaspoon dishwashing liquid with 7.5 liters of water) or baking soda
(sodium bicarbonate), scrub the vinyl top in a circular motion. Do not let the vinyl dry with a soap film on it before it can be rinsed clean.
4. Scrub the cover’s perimeter and side flaps. Rinse clean with water.
5. Rinse off the underside of the cover with water only (use no soap), and wipe it clean with a dry rag.
SERVICE NOTE:
To remove tree sap, use cigarette lighter fluid (not charcoal lighter fluid). Use sparingly, and rinse with a saddle soap solution immediately afterwards,
then wipe dry.
IMPORTANT REMINDERS:
•
DO
remove snow buildup to avoid breakage of the foam core from the additional weight of the snow.
•
DO
lock cover lock straps to secure the cover when the spa is not in use.
•
DO NOT
drag or lift the spa cover using either the flaps or the cover lock straps.
•
DO NOT
walk, stand, or sit on the cover.
•
DO NOT
place any metal or heat transferring object on the cover or place any type of plastic tarp or drop cloth over the cover as this may result in a melted
foam core, which would not be covered under the warranty.
•
DO NOT
use any lifting mechanisms, chemicals or cleaners except those recommended by Watkins Manufacturing Corporation or an Authorized Sales and
Service Dealer.
MAINTENANCE
Summary of Contents for CANTABRIA
Page 1: ...2 0 1 5 O W N E R S M A N U A L 5 0 H z...
Page 75: ......