40
ADDITIONAL FUNCTIONS
SUMMER TIMER
Your spa is equipped with a summer timer. The summer timer can be activated during hot summer months to maintain water temperature. Activating the summer timer
causes the heater to immediately shut down. The circulation pump will remain on for approximately 5 minutes pushing water through the heater to cool it down. Both
heater and circulation pump will then remain off for eight hours. The summer timer icon will be displayed on the main control panel and will remain displayed for as long
as the summer timer mode is on. The circulation pump and heater will automatically shut down for the same eight hours every day until the summer timer is deactivated.
It is recommended to activate the summer timer in the morning so that the spa is off during the hottest part of the day and so that the circulation pump will start up again
in the evening when you are ready to enjoy the spa.
IMPORTANT:
The Summer Timer will not lower the spa’s water temperature below the ambient air temperature. Ambient conditions, including humidity, wind and shading
will affect your spa water temperature.
To activate the Summer Timer, simply follow these steps:
Press the OPTIONS Hard button on the Main Control panel.
Press the soft button next to
Set up
.
Press the soft button next to
Summer Timer
to activate. The Summer timer icon will display when activated.
IMPORTANT:
If water temperature falls below 80°F (26.7°C) the summer timer will automatically be disabled.
The Summer Timer should be deactivated when cooler temperatures return. To do this, simply repeat step above. The Summer
Timer icon will turn off.
BRIGHTNESS
If you would like to change the screen brightness of the Main Control panel:
Press the OPTIONS Hard button on the Main Control panel.
Press the soft button next to
Set-up
.
Press the soft button next to
Brightness
to lower the brightness from 7 down to 1.
IMPORTANT:
Pressing the Brightness soft button at number 1 will increase the screen brightness back to 7.
LANGUAGE
The Main Control panel screen can be viewed in seven different languages. The languages are English, French, German, Dutch,
Spanish, Swedish, and Norwegian. To change languages:
Press the OPTIONS hard button on the Main Control panel.
Press the soft button next to
Set-Up
.
Press the soft button next to
More.
Press the soft button next to
Language
until the desired language is visible.
IMPORTANT:
Should you accidently change the language screen into a language you don't know, simply repeat the previous steps.
AUTO CLEAN CYCLE
Your spa is equipped with an Auto Clean Cycle, this feature when enabled, will turn on the air jets and hydromassage jets in a preset sequence for 10 minutes every day
at the same time.
To activate the Auto Clean Cycle wait for the time of day you would like the automatic feature to start, then follow the steps below:
Press the OPTIONS hard button on the Main Control panel.
Press the soft button next to
Set-Up
.
Press the soft button next to
More.
Press the soft button next to
Auto Clean Cycle
to
On
to start the cycle. To disable the automatic daily cycle, press the soft button next to
Auto Clean Cycle
so it reads
Off
.
AUTO EXTERIOR LIGHTS
The Automatic Light Feature allows you to set the
SPAGLO
lighting system (external sconce lights only) to activate at the same time every day and stay on for 6 hours.
Wait for the time of day you would like the automatic feature to start, then follow the steps below:
Press the OPTIONS hard button on the Main Control panel.
Press the soft button next to
Set-Up
.
Press the soft button next to
More.
Press the soft button next to
Auto Exterior Lights
to
On
to start the 6 hour light cycle. To disable the automatic light feature, press the soft button next to
Auto Exterior
Lights
so it reads
Off
.
UTOPIA OPERATING INSTRUCTIONS
Summary of Contents for CANTABRIA
Page 1: ...2 0 1 5 O W N E R S M A N U A L 5 0 H z...
Page 75: ......