U
ser
'
s
G
Uide
— 57
auto-Range
— If an “overflow” is created because of an input
and calculation with small units that are out of the standard
eight-digit range of the display, the answer will be automatically
expressed in the next larger units (instead of showing “
oflo
”)
— e.g., 200,000,000 mm is shown as 200,000 m. Also applies
to inches and feet.
AuTO SHuT-OFF
Your calculator is designed to shut itself off after about 8-12
minutes of non-use.
BATTERIES
The
Machinist Calc Pro
uses two LR-44 batteries. Should
your calculator display become very dim or erratic, replace
the batteries.
Note:
Please use caution when disposing of your old batteries, as
they contain hazardous chemicals.
Replacement batteries are available at most discount or
electronics stores.
battery Replacement Instructions
To replace the batteries, slide open the battery door (at top
backside of unit) and replace with new batteries. Make sure
the batteries are facing positive side up.
RESET
If your calculator should ever “lock up,” press Reset – a small
hole located above the
C
key – to perform a total reset.
UG4089E-A-inside.indd 57
6/9/2011 3:16:19 PM