U
ser
'
s
G
Uide
— 5
Dimensional function Keys
m
Millimeters —
Identifies entry as millimeters, with
repeated presses toggling between linear, area and
volume units. Converts dimensional value to units of
millimeters, with repeated presses toggling between
millimeters and meters.
g 5
centimeters (cm) —
Identifies entry as centimeters,
with repeated presses toggling between linear, area
and volume units.
g 9
Meters (m) —
Identifies entry as meters, with
repeated presses toggling between linear, area and
volume units.
g 7
Feet
—
Identifies entry as Feet, with repeated
presses of
g 7
toggling between linear, area and
volume units. Also used with
i
and
/
for entering
Feet-Inch values. Repeated presses of
g 7
during
conversions toggle between fractional Feet-Inch and
decimal Feet.
i
Inch —
Identifies entry as Inches, with repeated
presses toggling between linear, area and volume
units. Entry can be whole or decimal numbers. Also
used with
/
for entering fractional Inch values (e.g.,
9 i 1 / 2
). Repeated presses during conversions
toggle between fractional and decimal Inches.
/
Fraction bar —
Used to enter fractions. Fractions
can be entered as proper (1/2, 1/8, 1/16) or improper
(3/2, 9/8). If the denominator (bottom) is not
entered, the calculator’s fractional accuracy setting
is automatically used. Results are always shown in
typical dimensional fractional format.
UG4089E-A-inside.indd 5
6/9/2011 3:16:16 PM