background image

8/18/2021

LMU-2600 Hardware & Installation Guide - PULS Wiki

https://puls.calamp.com/wiki/LMU-2600_Hardware_%26_Installation_Guide

39/44

Hex Dump, LM Exchange™ Traffic Monitor, Freewave Base Station Config, Remote Serial Port, App
Watcher Service and/or other software products licensed by CalAmp for use in computer applications
development or integration including the computer programs, libraries and related materials either contained
on the media provided to you by or from CalAmp, or which you have received or downloaded electronically.
“Application” means a compiled or executable software program created by Developer that uses some or all of
the functionality of the Software. “Software Copies” means the actual copies of all or any portion of the
Software including backups, updates, merged or partial copies permitted hereunder or subsequently licensed to
you. “Documentation” means the non-Software information contained on the media provided with this
package or downloaded and which is used with and describes the operation and use of the Software.
“Documentation Copies” means the actual copies of all or any portion of the Documentation including
backups, updates, merged or partial copies permitted hereunder or subsequently provided to you. “Related
Materials” means all other materials and whatever is provided by or from CalAmp, and the non-Software and
non-Documentation contained on the media supplied, downloaded, or otherwise supplied by or from CalAmp
for use with the Software and Documentation. “Server” means a single, networked computer that is accessible
to other client machines on the network. “User” means (i) a single person using an Application for his/her
internal, use or (ii) a single terminal or a single workstation of a computer used only by a person (and not
accessed otherwise) for accessing an Application. “Use License” means limited rights granted by CalAmp for
deployment of a single Application to a User. “Developer” means a single programmer developing an
Application. “Developer License” means the grant of certain limited rights to use and maintain the Software,
Software Copies, Documentation, Documentation Copies and Related Materials in development of
Applications.

Background:

 A Developer License is required for each Developer who uses the Software in building

Application(s). A Use License is required and must be purchased by Customer for each User to which
Customer provides access to an Application (unless a Server or Site license for unlimited or a specified
number of users has been purchased). Each Use License is specific to one client-side Application only and
may not be used for any other client-side Application. Each Server license is limited to Server-based
Applications deployed on that Server for which the license has been purchased as specified in a CalAmp
License Certificate. The Software is licensed on a per Developer, and on a per User, per Application basis. In
order to preserve and protect its rights under applicable law, CalAmp is not selling you ownership rights to
Software or Documentation (owned by or licensed to CalAmp). CalAmp specifically retains title to all
CalAmp Software, Documentation and Related Materials and CalAmp licensors retain title to items owned by
them.

Duration:

 This License Agreement is effective from the day you install or start using the Software, or receive

or download it electronically, and continues until terminated. If you fail to comply with any provision of the
License, termination is automatic, without notice from CalAmp and without the necessity for recourse to any
judicial authority. Upon termination, you must destroy the Related Materials, the Software, Documentation
and all Software and Documentation copies. CalAmp can also enforce its other legal and equitable rights.

Developer License Only—Uses Permitted:

 Software and Documentation may be used for the sole purpose

of developing Applications and only by a licensed Developer. Software and Documentation may be installed
onto a hard disk drive or a Server, access to which is restricted to Developers for which a Developer License
has been purchased and may also be stored or installed on a storage device such as a network server, used only
to install or access the Software or Documentation on your other computers over an internal network;
however, you must have acquired a license for each separate computer on which the Software or
Documentation is installed or accessed from the storage device. A Developer License may not be shared or
used concurrently on different computers. One backup copy may be made for each legally obtained media
copy or electronic copy you have received, provided that all CalAmp and third party licensor information —

Summary of Contents for LMU 2600 Series













































Reviews: