Page 32
2008 Gazebo Owner’s Manual
LTR20081011, Rev. A
Luxury Gazebo Assembly
Step 3: Roof Panel Installation
It is strongly recommended that you use a ladder for the
final steps of the gazebo assembly.
Prior to installing the roof panels, a center line must
be drawn on the top side of each rafter (Figure A).
Place each roof panel in place (with the edge being
flush with the center line) and mount using 2 1/2”
screws (Figure B).
Using the provided hardware, mount the dome
bracket (Figure C).
Use the provided 1 1/2” screws to mount all ridge
caps (Figure C).
1.
2.
3.
4.
Some roof panels may
have a gap at the top
of the panels
Use 1 1/2" screw
Use
1" screw
IMPORTANT
Center all roof panels
on rafters
Install ridgecaps
after all panels
are installed on
center of rafters
A
B
C
Ridgecap
Some roof panels may
have a gap at the top
of the panels
Use 1 1/2" screw
Use
1" screw
IMPORTANT
Center all roof panels
on rafters
Install ridgecaps
after all panels
are installed on
center of rafters
A
B
C
Ridgecap
Some roof panels may
have a gap at the top
of the panels
Use 1 1/2" screw
Use
1" screw
IMPORTANT
Center all roof panels
on rafters
Install ridgecaps
after all panels
are installed on
center of rafters
A
B
C
Ridgecap
