Page 8
2008 Fireplace and Firepit Owner’s Manual
LTR20081006, Rev. A
Installation and Assembly
Fire Pit Burner Installation
The log set, log grate and crushed lava rock are shipped together on applicable models.
Remove the log set and un-pack all components. The logs are fragile -- use care when handling.
Turn the fire pit on its side. Connect the
piezoelectric starter and attach the flex hose
for the gas supply.
Place the fire pit back down on its pedestal. Attach the
gas flex hose to the burner.
Note: If you want to convert the orifice from LP to NG,
this is location of the orifice. See next page for gas
converstion instructions.
Set the burner in the center of the pit and place the ring
around it.
Place the rocks around the burner.
Arrange the log set on top.
Applies to all fire pits.
Summary of Contents for FPT-1100
Page 1: ...LTR20081006 Rev A 3 10 08...
