26
Appendix
Hibachi Grill
LTR50001096, Rev. A
www.calflamebbq.com
Step 1: Switching the regulator behind the grill
The regulator in the image below has
been removed from a grill to illus-
trate this procedure.
Remove the LP gas line.
1.
Remove the cap fitting from the
2.
end of the NG gas regulator.
Place the cap fitting over the LP
3.
gas inlet.
Insert a male flared fitting (
4.
not provided
) in the NG gas regula-
tor.
You will need:
13 mm open end
•
wrench
Male flared fitting
•
(not provided)
Pipe compound suitable
•
for natural gas
NOTE: A flared
fitting is NOT includ-
ed with your grill.
If you are attaching a
flex hose to the regu
-
lator, you will need a
fitting. The fitting re
-
quires a male flare on
the input end with a
1/2” MPT on the output
end. The flared male in
-
put end needs to be the
size of your flex tubing.
You can also connect
the regulator directly
to your NG gas service,
which will not require a
flared fitting.
Summary of Contents for BBQ10900
Page 1: ......