Cal Flame BBQ08872U, Owner'S Manual, Page: 19 / 20

Cal Flame 2008 Owner’s Manual Page 17
LTR20081044, Rev. A
Appendix
Disconnect or shut off the gas line connect to the 1.
grill. Wait until the burners cool down.
Open the hood and remove the grate and flame 2.
tamer on top of the burner you want to replace.
Through the access door underneath the grill, find
3.
the round stud and locking pin that locks the burner
you want to replace.
Carefully remove the locking pin with your fingers. 4.
Raise the stud from the locking hole and move the 5.
burner forward carefully to release it from the igni-
tion and gas supply valve.
Take the burner out of the grill and store it in a safe
6.
and dry place.
Install the infrared burner. Align the gas inlet on the 7.
burner with the gas supply valve on the grill and
torch tube with ignition. Make sure they align per -
fectly. Slide the stud at the other end into the locking
hole.
Adjust the infrared burner. Make sure the burner is 8.
aligned and in position.
Install the locking pin. Through the access door un
- 9.
derneath the grill, find the stud to lock the burner in
place. Install the locking pin. Make sure the locking
pin is secured correctly.
Repeat steps 2 through 9 if you want to replace oth
- 10.
er burners.
Put back the grate you just removed. (You don’t 11.
need the flame tamer for infrared burners.)
Reconnect or turn on the gas line. 12.
If you want to change back to regular burners, just follow
the procedure above in reverse order.
Removing and Replacing Infrared Burners
Replacement Covers
5 burner with deluxe 2 side burner CVRCRT036
Standard single flat side burner CVRSBR050
Standard side by side flat burner CVRSBR052
Deluxe double side burner CVRSBR054
Deluxe double side by side burner CVRSBR056
2 burner / 3 burner grill CVRBLT001
4 burner grill CVRBLT003
5 burner grill CVRBLT007
2 burner / 3 burner cart CVRCRT030
4 burner cart CVRCRT032