Phantom II
© CalAmp
55
6.0 Configuration
Image 6-11: Network Configuration, DHCP Server Config.
Prior to enabling this service,
verify that there are no other
devices - either wired (e.g. LAN)
or wireless (e.g. another
Phantom II) with an active DHCP
SERVER service.
(The Server issues IP address
information at the request of a
DHCP Client, which receives the
information.)
Server Status
Choose to enable or disabled the DHCP Server service. Note that
there can only be one such service residing on a network segment -
otherwise, duplicate IP addresses could be assigned and exist on a
network, which would result in problems. Devices on the network,
which are intended to receive IP address information from this
DHCP Server, must have their local IP settings
set for ‘DHCP’ (as
opposed to
‘static’)
Disable
Disable
Enable
Values
Summary of Contents for Phantom II
Page 160: ...Phantom II CalAmp 160 Appendix E Customer Interface Schematic 1 of 3 ...
Page 161: ...Phantom II CalAmp 161 Appendix E Customer Interface Schematic 2 of 3 ...
Page 162: ...Phantom II CalAmp 162 Appendix E Customer Interface Schematic 3 of 3 ...
Page 164: ...299 Johnson Ave Suite 110 Waseca MN 56093 Phone 800 992 7774 Fax 507 833 6748 www calamp com ...