Cal Amp 2630MB Hardware And Installation Manual Download

Page: 9 / 66

LMU-2x20™ Hardware and Installation Guide

V1.0.10

December 12, 2010

- 1 -

CalAmp Proprietary & Confidential

Introduction

Welcome to the LMU-2x30™ Hardware and Installation Guide. This manual is intended to
give you information on the basic setup and installation of the CalAmp LMU-2x30™

product including hardware descriptions, environmental specifications, wireless network

overviews and device installation.

1.1

About This Manual

The LMU-2x30™ is one of the most flexible and economical mobile tracking hardware

products available. In order to accurately describe the functionality of these units we have

broken this manual into the following sections:



System Overview

: A basic description of a CalAmp LMU-2x30™ based tracking

system. This includes a description of roles and responsibilities of each of the

CalAmp components as well as a brief overview of the wireless data technologies

used by the LMU-2x30™.



Hardware Overview

: Describes the physical characteristics and interfaces of the

LMU-2x30™.



Installation and Verification

: Provides guidance for the installation of the LMU-

2x30™ in a vehicle and instructions on how to verify the installation is performing

adequately.

Summary of Contents for 2630MB



































































Search results

Summary of Contents for 2630MB

Reviews:

Related manuals for 2630MB

Brands by name

Popular brands

Cal Amp 2630MB, Hardware And Installation Manual

Search results

Summary of Contents for 2630MB

Reviews:

Related manuals for 2630MB

Brands by name

Popular brands