background image

LMU-2x20™ Hardware and Installation Guide

 

V1.0.10 

 

December 12, 2010 

Copyright ©Calamp Wireless Networks Inc 2010

 

- iv - 

CalAmp Proprietary & Confidential

 

Limited Warranty 

C

OVERING THE 

P

HYSICAL 

M

EDIA AND 

P

RINTED 

M

ATERIALS

:

 CalAmp warrants to you, the original licensee, that the media on 

which the Software is recorded are free from defects in materials and workmanship under normal use and service FOR A PERIOD 
OF NINETY (90) DAYS FROM THE DATE OF DEVELOPER LICENSE PURCHASE. CalAmp’s entire liability and your 
exclusive remedy as to defective media, Documentation or Related Material(s) shall be replacement of the media, Documentation or 
Related Material(s) by CalAmp. Each defective item, along with proof of license purchase and date, must be sent in a traceable 

manner to: Calamp Wireless Networks., 1401 North Rice Ave. Oxnard, CA 93030. 
 

D

ISCLAIMER 

R

EGARDING THE 

S

OFTWARE

,

 

D

OCUMENTATIONS AND 

R

ELATED 

M

ATERIALS

:

 THE SOFTWARE, 

DOCUMENTATION AND RELATED MATERIALS ARE PROVIDED “AS IS.” EXCEPT AS MAY OTHERWISE BE 

EXPRESSLY SET FORTH HEREIN, CALAMP MAKES NO REPRESENTATIONS OR WARRANTIES, EXPRESS OR 
IMPLIED, WITH RESPECT TO THE SOFTWARE, DOCUMENTATION OR RELATED MATERIALS INCLUDING BY 
WAY OF EXAMPLE, AND NOT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
FOR A PARTICULAR PURPOSE. BY WAY OF FURTHER EXAMPLE AND NOT LIMITATION, CALAMP MAKES NO 

REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE ACCURACY, RELIABILITY 
OR COMPLETENESS OF THE DOCUMENTATION OR THE RELATED MATERIALS. THE ENTIRE RISK AS TO THE 
USE OF THE SOFTWARE, DOCUMENTATION AND RELATED MATERIALS IS ASSUMED BY YOU. IN NO EVENT 
SHALL CALAMP BE LIABLE TO YOU OR ANY OTHER PERSON, REGARDLESS OF THE CAUSE, FOR THE 

EFFECTIVENESS OR ACCURACY OF THE SOFTWARE, DOCUMENTATION OR RELATED MATERIALS OR FOR 
ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM OR OCCASIONED BY 
YOUR USE OF THE SOFTWARE, DOCUMENTATION OR RELATED MATERIALS, EVEN IF ADVISED OF THE 
POSSIBILITY OF SUCH DAMAGES. IN THE EVENT THE FOREGOING IS FOUND BY A COURT OF COMPETENT 

JURISDICTION TO BE INEFFECTIVE, YOU HEREBY AGREE THAT CALAMP’S MAXIMUM LIABILITY FOR ANY 
CLAIM ARISING IN CONNECTION WITH THE SOFTWARE, DOCUMENTATION AND/OR RELATED MATERIALS 
(WHETHER IN CONTRACT, TORT, INCLUDING NEGLIGENCE, PRODUCT LIABILITY OR OTHERWISE) SHALL 
NOT EXCEED THE LICENSE FEES PAID BY YOU WITH RESPECT TO THE SOFTWARE, DOCUMENTATION 

AND/OR RELATED MATERIALS AT ISSUE. SOME STATES DO NOT ALLOW THE LIMITATION OR EXCLUSION OF 
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE FOREGOING PROVISION, WITH RESPECT TO 
EXCLUDING OR LIMITING SUCH DAMAGES, MAY NOT APPLY TO YOU. 
 

A

CKNOWLEDGEMENT

:

 You acknowledge that you have read this LIMITED WARRANTY, understand it and agree to be bound by 

its terms and conditions. You also agree that: (1) No oral or written information or advice given by CalAmp, its dealers, distributors, 
agents or employees shall in any way increase the scope of this Limited Warranty and you may not rely on any such information or 
advice; (2) Unless a written governing agreement signed by you and CalAmp exists, this License Agreement is the complete and 

exclusive statement of agreement between CalAmp and you regarding the licensing of the Software, Documentation and Related 
Materials and supersedes all proposals, oral or written, and any other communications you may have had prior to purchasing your 
license; (3) Except for the price and delivery terms agreed upon by both parties, the terms and conditions of this License Agreement 
shall supersede those set forth in any purchase order where the purchase order conflicts or is inconsistent with or adds to the terms 

and conditions of this License and those superseded purchase order terms and conditions shall be null and void; (4) You agree to 
assure that copies of this License Agreement are distributed, read and agreed to by each Developer using the Software and/or 
Documentation. 
 

G

OVERNING 

L

AW

:

 This Agreement shall be governed by the laws of the State of California, United States, excluding its conflicts of 

law principles and excluding the United Nations Convention on Contracts for the International Sale of Goods. You agree to exclusive 
jurisdiction of California State federal and state courts, Ventura County, for resolution of any dispute related to this Agreement. 
 

U.S.

 

G

OVERNMENT 

P

ROTECTED 

R

IGHTS

:

 The Software Documentation and Related Materials are provided with RESTRICTED 

RIGHTS. Use, duplication or disclosure by the Government is subject to restrictions as set forth in subparagraph ©(1)(ii) of the 
Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 or subparagraphs ©(1) and (2) of the Commercial 
Computer Software-Restricted Rights at 48 CFR 52.227-19, as applicable. Manufacturer is Calamp Wireless Networks., 1401 North 

Rice Ave. Oxnard, CA 93030. Rights are reserved under copyright laws of the United States with respect to unpublished portions of 
the Software. 

Summary of Contents for 2630MB



































































Reviews: