CAKEWALK UM-3G, Owner'S Manual, Page: 43 / 52

43
Appendices
Connecting two UM-3G (or UM-3EX) units
[MODE] switch and [UNIT] switch settings
* Do not change the setting of the [MODE] switch or [UNIT] switch while the UM-3G (or UM-3EX)
is connected to your computer. Before changing the setting of the [MODE] switch or [UNIT]
switch, you must first disconnect the UM-3G (or UM-3EX) from the computer, change the
setting of the switch, and then reconnect the UM-3G (or UM-3EX) to your computer.
Connection Examples
Switch Condition Setting
[MODE] switch
UM-3G connected to the computer MASTER
UM-3G (or UM-3EX) connected to a UM-3G/UM-3EX
connector
SLAVE
[UNIT] switch
First unit 1
Second unit 2
First UM-3G unit
Second UM-3G
(or UM-3EX) unit
Connect to the USB connector
of your computer.
Connect to the upper UM-3G/
UM-3EX connector of the first
unit (MASTER).
Set to 1.
Set to
MASTER.
Set to 2.
Set to
SLAVE.
UM-3G_e.book 43 ページ ２００８年１１月２０日 木曜日 午後４時１０分