CAKEWALK UM-3G, Owner'S Manual, Page: 24 / 52

24
Basic Use
This chapter describes different basic methods of connecting the UM-3G according to how
the UM-3G is to be used.
To transmit MIDI messages from a MIDI keyboard or digital piano to the sequencer software
or make a MIDI recording of a keyboard performance or other performance using sequencer
software on your computer, make the following connections and settings.
fig.connect-in_e
MIDI device setting
In your sequencer software, select the MIDI device for the connector to which you connected
your MIDI equipment (e.g., MIDI keyboard or digital piano).
[MIDI THRU] switch setting
MIDI messages from the MIDI device (e.g, MIDI keyboard, digital piano) connected to the UM-
3G’s MIDI IN connector are transmitted to the computer.
* Don’t change the setting of the [MIDI THRU] switch while you’re using the UM-3G. Doing so will
cause MIDI errors.
Basic Connections and MIDI Flow
Transmitting MIDI Messages from a MIDI Keyboard or Digital Piano to the
Sequencer Software
[MIDI THRU] switch OFF
MIDI messages are transmitted
to the sequencer software.
Connect to the
computer’s
USB connector.
[MIDI THRU] Switch OFF
Connect to the MIDI OUT connector
of the MIDI keyboard or digital piano.
MIDI Keyboard
Digital Piano
: MIDI Message Flow
UM-3G_e.book 24 ページ ２００８年１１月２０日 木曜日 午後４時１０分