Step 1 – Secure Base
Gently lay smoker on its side, revealing the bot-
•
tom of the appliance for easy assembly.
Align the four holes of a wheel to the four holes
•
on
the back corner of the bottom of the smoker. Us-
ing four of the provided screws, install the wheel
to the base by fastening each screw into a hole.
(Repeat this step to secure the second wheel to
the opposite back corner of the smoker).
Insert each of the legs into one of the holes
•
on
the front corners of the appliance and rotate
clockwise to secure the legs. The height may be
adjusted by loosening and tightening the legs.
WARNING: Check for proper balance to prevent
movement while in use.
Return smoker to upright position to continue
•
with assembly.
Step 2 – Install Handle
Remove handle and two screws from the back of
•
the appliance.
Align handle with the two screw holes on the
•
front of the smokers’ door. Install the handle by
fastening a screw into each hole.
ASSEMBLY INSTRUCTIONS
Tools needed: Phillips Head Screwdriver
Summary of Contents for Electric Smoker
Page 35: ......