openings from the lock. The follow messages will appear in the PP:
a) Reading
b) Setting clock
c) End communication
3. With the openings loaded, read them in the HT24 program. To read the openings use
the “Lock openings” option in the Security menu.
A message “Connect the portable programmer and turn it ON” will appear. After
connecting and turning it on, the list of the collected openings will appear. Select the
lock from the list and the openings register will appear.
4.4. Test
With this function, the portable programmer checks the status of the locks.
Steps to follow:
1. Turn the portable programmer ON and with the <MENU> button select the option 3.
TEST.
2. Connect the PP to the lock and press the <TX> button.
3. The first screen will shows the electronic module type (HT24F, HT28F, HTProx or
OLHM (Advance)), and the firmware version.
4. Pressing the <TX> key again the time of the lock will appear. The PP will check also
the batteries level.
