This function updates the code and the time tables (or only the time tables if the codes
are not uploaded) of the locks.
Steps to follow:
1. Upload the PP with the locking plan.
2. Turn the PP on and select the option 1. UPDATE by pressing the <MENU> key.
3. All the locks that are not updated yet will appear in the list of the PP pressing the
cursor keys. When a door is updated it will disappear from the list.
4. With the cursor keys select the door to be updated.
5. Connect the PP to the lock (using the “Jack” terminal wire) and press the <TX>
button. If the data transfer has been successfully finished, the follow message will
appear:
4.3. Read openings from the locks
The PP extracts the last openings recorded by the lock. This openings will be recorded
in the PP until they are erased with the HT24 program.
To read the openings from a lock follow the following steps:
1. Turn the PP ON. With the <MENU> button select the option 2. READ OPENINGS.
2. Connect the jack to the lock and press the <TX> button. The PP will read all the
