B-701417-00 Rev D
7
•
Fill Connector:
located in the top center of the Stationary unit.
When filling a Portable, attach the female fill connector in the
bottom of the Portable (Figure 8 and Figure 10) to the male fill
connector on the Stationary.
Note: On Dual-Fill Stationary units, a second connector on
the side of the unit allows you to fill a side-fill type Portable
unit. Follow the Portable unit manufacturer’s instructions
for filling this type of equipment.
•
Fill Connector Cover:
(optional on standard units) protects the
top fill connector when not in use. Always replace the fill
connector cover, if present, after filling your Portable unit.
Extreme cold hazard. Do not press or
disturb the fill connector poppet (Figure 4).
This can cause a release of liquid oxygen
from the fill connector.
•
Portable Release Button:
used to remove bottom-fill type
Portable units from a Stationary unit after completing a fill.
Figure 4: Stationary Components
Summary of Contents for Companion Series
