700M HFID
6-2-15
12
The
symbol (a lightning bolt in a triangle) precedes an electrical shock hazard
CAUTION or WARNING statement.
Some or all of the above symbols may appear in this manual or on the equipment. This manual
should be consulted whenever one of these symbols is encountered on the equipment.
ALWAYS REMOVE POWER BEFORE CONNECTING OR DISCONNECTING SIGNAL
CABLES OR WHEN SERVICING THE EQUIPMENT.
Potential Explosion Hazard
WARNING:
This analyzer uses a fuel that contains a FLAMMABLE LEVEL OF
HYDROGEN. Any leakage from this fuel can result in an explosion. Carefully check the fuel
supply system for leaks upon installation, before initial startup, during any maintenance or after
the integrity of the system is compromised.
Do not apply power to the analyzer or attempt to ignite the burner until ALL leak checks are
performed and the analyzer environment is verified as non-hazardous. This analyzer is NOT
designed for use with a hazardous sample.
Use of substitute components may cause a safety hazard. Use only factory-authorized
replacement parts.
Electrical Shock Hazard
Do not operate the analyzer without the cover secured. Servicing the analyzer requires access to
live electrical circuits that can cause death or serious injury. Refer servicing to qualified service
personnel. For safety and proper performance, connect this instrument to a properly grounded
three-wire receptacle.
Summary of Contents for 700M
Page 1: ...700M HFID 6 2 15 1 ...
