The WebMux™ Model 480S, 580SG, and 680PG User Guide – Version 7.0.x
Copyright© 1997-2006 CAI Networks, Inc.
46
service you choose is not listed in the list below, you will need to specify a port
number here. For example, for MS Terminal Services, use port number 3389. If
you enabled SSL termination (see last chapter), select port 80 for the farm and
servers in the farm. The WebMux™ will terminate all SSL (on port 443) traffic
and send them to port 80(DO NOT select port 443 if you enabled SSL
termination). For example, if you have five port-80 farms and your WebMux™
only allows one certificate, the WebMux™ will use same certificate for all five
farms.
Service
:
This is the service of the new farm. Select a service type to create a farm using
its well-known port. If a port other than a well-known port for TCP or UDP
service is to be used, then choose one of the “Generic” selections, and enter the
port number in the PORT NUMBER box. No port number needed to be specified,
if the service protocol is on the list. The WebMux™ has level 7 protocol checks
for the known ports in the list. For Custom Defined TCP Service (custom health
check), please specify the URL for the CGI code in the setup screen.
CAUTION:
Once a farm is created, the port number cannot be changed. Like the IP address,
the old farm must be deleted and a new one created, in order to change farm settings. Please
choose “Generic TCP” and specify port number, if service is not listed below. If multiple ports to
be used, please also select “Generic TCP” and specify port number “0”.
Service
Well-Known Port#
DNS – Domain Name Service (TCP)
53
FTP – File Transfer Protocol (TCP)
21
HTTP – Hypertext Transfer Protocol (TCP)
80
HTTPS – Secure Hypertext Transfer
Protocol (TCP)
443
HTTP/HTTPS Combined Ports
80/443
NTP – Network Time Protocol
123
POP3 – Post Office Protocol
110
SMTP – Simple Mail Transfer Protocol
(TCP)
25
Generic TCP
User Specify
Generic UDP
User Specify
Generic TCP/UDP
User Specify
Generic no health check (TCP)
User Specify
Generic no health check (UDP)
User Specify
Generic no health check (TCP/UDP)
User Specify
Custom Defined TCP Services
80 or User Specify
Custom Defined UDP Services
User Specify
Custom Defined TCP/UDP Services
User Specify
Custom Defined Paired HTTP and HTTPS
(TCP) Service
User Specify
Summary of Contents for WebMux 480S
Page 4: ...iv...
