The WebMux™ Model 480S, 580SG, and 680PG User Guide – Version 7.0.x
Copyright© 1997-2006 CAI Networks, Inc.
62
There is no change to each server’s IP address, netmask and gateway address
(except if using the WebMux
TM
for SSL termination or Layer 7 load balancing.
See next paragraph). There is need to add a loopback adapter to each server,
and assign the farm address to the loopback adapter. For MS Windows, it always
adds a route for the loopback adapter, which will need to be removed, please
refer to Appendix 2. In the virtual farm, each server uses its original IP address to
join the farm.
For SSL termination or Layer 7 load balancing, you must set server LAN gateway
IP address and set the servers’ default gateway to that IP.
Summary of Contents for WebMux 480S
Page 4: ...iv...
