48
Checklist
• Clean your bike and check it for damage after every ride.
• Always have inspections performed by a specialised dealer. We recommend
using one of our Ca Go dealers. You can find our network of dealers at
www.cagobike.com/en/dealer-search
• Service moving parts according to the manufacturers’ instructions.
• Have paint damage repaired.
• Have defective and worn parts replaced.
Like all mechanical components, your FS200 Vario is subject to wear and high
mechanical stress. Different materials and components can react differently
to wear and continuous loads. If the planned service life of a component is
exceeded, such component can fail suddenly and possibly lead to injury for the
rider. Any type of tears, grooves or discolouration in highly stressed areas
indicates that the component has reached the end of its useful life and should
be replaced.
As a general rule, the use of non-original or improper spare parts can lead to a
loss of function. Tyres with poor ground adhesion or safety of use, brake pads
with poor friction, as well as incorrectly fitted or poorly designed lightweight
construction parts can cause accidents. The same applies in cases of improper
assembly.
To be sure that your bike is in the best working condition, it needs to be
serviced at regular intervals. Leave work on the FS200 Vario to the Ca Go
dealer. You can find information on components and their care and servicing
in the manufacturers’ instructions and websites.
Ask the Ca Go team online in the FAQ section for suitable lubricants and
care products. Alternatively, you can ask a Ca Go dealer to assist you.
Not all materials are suitable for all purposes. The wrong lubricants can lead
to damage and loss of function!
Summary of Contents for FS200 Vario
Page 1: ...EN FS200 Vario User manual...
Page 55: ......
