24
Braking in
Wear
New brake pads and rotors need to be braked in carefully before their first
proper use. This will optimise braking performance.
Do this as follows:
Accelerate the FS200 Vario to 25 km, then bring it to a stop by braking hard.
Repeat this step approx. 20 times. For optimal results, avoid locking up the
wheels.
You can find more information in the original operating instructions of the
brake manufacturer enclosed to your FS200 Vario.
Brake pads wear out from normal use. Check the condition of the brake
system and brake pads at regular intervals (Fig. 15). Have brake fluids and
worn brake pads checked for wear and replaced at regular intervals by the
Ca Go dealer. Please make sure that rotors are clean and free from grease.
You can find more information in the brake manufacturer’s instructions.
Fig. 15
The minimum thickness of brake
pads and rotors as required by the
manufacturer must be observed.
For more information, please read
the accompanying manufacturer’s
operating instructions.
Summary of Contents for FS200 Vario
Page 1: ...EN FS200 Vario User manual...
Page 55: ......
