25
The materials and
objects in contact with
food products comply
with the requirements
of European Regulation
1935/2004.
Technical data
The coffee is not hot
enough.
- Cold cups / espresso cups.
- Scale build-up in machine.
- Preheat cup.
- Descale.
No coffee is brewed.
The water tank is empty.
Fill the tank with fresh water (Fig. 4).
The lever cannot be
lowered.
- The used capsule drawer
is full.
- Capsule stuck inside the
machine.
- Empty out the used capsule drawer
(Fig. 6).
- Remove the used capsule.
Indicator light
C
blinks
RED
when:
- the machine is switched
on;
- preheating for steam
dispensing is in progress.
The control lever is not in the
correct position.
Set the lever back to its central position
(Fig. 20).
Warning light
D
is lit stead-
ily in
RED
.
Heating problems.
Turn off the machine, then turn it back
on (Fig. 14). If the problem persists,
take the machine to an Authorised
Service Centre.
Indicator light
C
blinks
GREEN
rapidly for several
minutes.
Machine overheating.
Dispense hot water for a few seconds
(Fig. 21), until indicator light
C
remains
lit steadily.
Coffee is dispensed very
slowly, and is of poor
quality.
Button
A
was pressed with an
espresso capsule.
Do not press button
A
.
Troubleshooting
PROBLEM
POSSIBLE
CAUSE
SOLUTION
English
See the data plate on the
base of the machine.
Max. 15 bar
About 5 kg
< 70dB A
1,2 litres
ambient temperature:
10°C ÷ 40°C
220 mm
380 mm
14 capsules
290 mm
332 mm
