19
English
Turning on the appliance
•
Fill the tank with fresh, still water (Fig. 4).
•
Switch on the appliance by pressing the power on/off switch (Fig. 14).
• Buttons
A
-
B
-
C
will blink simultaneously to indicate that the machine is warming up. When
the buttons remain steadily lit, the appliance is ready for use.
General operating indications
DESCALING SIGNAL:
•
When warning light
D
blinks
YELLOW
, a descaling cycle should be carried out (see ch.
Descaling).
HEATING UP:
• Buttons
A
-
B
-
C
blink simultaneously.
WHEN THE WATER RUNS OUT DURING OPERATION:
•
The water tank is empty when indicator light
D
blinks
RED
and the appliance emits 3
beeps followed by a single intermittent beep.
•
Fill the water tank with fresh, still water (Fig. 4).
•
Press one of the buttons
A
-
B
-
C
. Wait for the machine to complete the water circuit fi lling
cycle.
• When
buttons
A
-
B
-
C
turn on and remain steadily lit, the appliance is ready for use.
IF THE LEVER IS RAISED WHILE DISPENSING:
•
Raising the lever while dispensing a product (Fig. 1) may cause splashes of hot water.
Danger of scalding!
• Warning
light
D
blinks
RED
and the machine emits a single intermittent beep. The
appliance will immediately stop dispensing.
•
Close the lever (Fig. 3).
•
Press one of the buttons
A
-
B
-
C
to reset the alarm.
•
The appliance is ready for use again.
Adjusting the cup/espresso cup height
•
The machine can be adjusted for the use of large cups or espresso cups.
•
The machine is initially set for the use of large cups (Fig. 7).
•
To achieve the best results when using espresso cups, you must lift and turn the grid on
top of the drip tray (Fig. 10).
•
At this point you may place an espresso cup under the coffee dispensing spout (Fig. 8).
•
If using tall glasses, you will need to remove the drip tray (Fig. 15).
•
At this point you may place a tall glass under the coffee dispensing spout (Fig. 16).
