7.2 REMOTE
CONTROL
7.2.1 BATTERY INSTALLATION
A.
Pulling the battery holder out of the slot remote.
B.
Install the battery. It uses CR 2032 battery.
C.
Reinstall the battery holder into the remote by sliding it into position, as shown.
Remote
(REAR VIEW)
Battery (CR 2032)
Battery Holder
Battery must be recycled or disposed of
properly. Check with your Local Authority or
Retailer for recycling advice in your area.
7.2.2 REMOTE OPERATION
7.2.2.1 REMOTE OPERATION FOR CHFPV-20
A.
Plug
in
your
electric
appliance.
B.
Press POWER
button, the appliance is on standby mode.
"
"
C
The ON
/
OFF" button can be used to power up or down the appliance. Pressing
this button activates the power to the appliance. Long-press this button for 6 seconds,
then after a beep, heating function will be locked,
Also long-press for 6 seconds again to unlock heating function.
,
.
"
the
backlight
of
this
button
will
be
off.
Under
the locked
mode
"
HEAT
"
button is
not
available.
EN
D
To change flame color, press the "COLOR A
button. There are 3 colors to choose
from red, yellow, and blue.
.
,
,
,
"
The indicator will
show
digital
"
1
"
to
"
3
"
when
changing
colors.
When you
press
the
button
for
3
seconds
until you hear a beep
the
indicator will show
digital
"
0
"
the flame
color and brightness
will
be
changed
automatically.
18
NOTE: Make certain new batteries are installed correctly and the appliance turned on! The
remote control will NOT work if the Main Power Switch is NOT pressed down. When operating
the remote control, it must be directed towards the right of appliance.
E
To change flame bed color, press the "COLOR B
button.
blue, red, purple,
green, cyan, yellow, and white.
.
,
,
"
There are 7 colors to choose from,
The
indicator
will
show
digital
"
1
"
to
"
7
"
when
changing
colors. When you
press
the button
for
3
seconds until you hear
a
beep the
indicator
will
show
digital
"
0
"
the
flame
bed
color and
brightness will be
changed automatically.
