Purpose of this Manual
This document is the A7030-AG7030 3kV/ 1mA (1.5W) HV Boards user manual; it contains information about the
installation, the configuration and the use of the board.
Change Document Record
Date
Revision
Changes
30 March 2015
0
PRELIMINARY Release
9 April 2015
1
Updated Overview and Channel status
5 June 2015
2
Updated Technical Specifications
1 July 2015
3
Update to new range 3kV/1mA
30 July 2015
4
Updated Channel specs p.5, set/mon parameters p.10
10 November 2015
5
Updated with 12, 24, 36 channel versions
13 April 2016
6
Updated pictures and table 2
03 September 2019
7
Updated Table1
Symbols, abbreviated terms and notation
T.B.D.
Reference Documents
Disclaimer
No part of this manual may be reproduced in any form or by any means, electronic, mechanical, recording, or otherwise,
without the prior written permission of CAEN SpA.
CAEN will repair or replace any product within the guarantee period if the Guarantor declares that the product is
defective due to workmanship or materials and has not been caused by mishandling, negligence on behalf of the User,
accident or any abnormal conditions or operations.
CAEN declines all responsibility for damages or injuries caused by an improper use of the Modules due to negligence on
behalf of the User. It is strongly recommended to read thoroughly the CAEN User's Manual before any kind of operation.
CAEN reserves the right to change partially or entirely the contents of this Manual at any time and without giving any
notice.
Disposal of the Product
The product must never be dumped in the Municipal Waste. Please check your local regulations
for disposal of electronics products.
Made In Italy
: We stress the fact that all the boards are made in Italy because in this globalized world, where getting
the lowest possible price for products sometimes translates into poor pay and working conditions for the people who
make them, at least you know that who made your board was reasonably paid and worked in a safe environment. (this
obviously applies only to the boards marked "Made in Italy", we cannot attest to the manufacturing process of "third
party" boards).
