SoundCam - Software - Function Buttons
Page 8 of 17
Example:
two noise sources (2,5 kHz and 5 kHz)
set cursors e.g. at 1728 Hz and 3998 Hz -> you
see just the noise source 2,5 kHz
Example :
two noise sources (2,5 kHz and 5 kHz) +
Dropping paper clip (Impulse - see red marker
in sonogram)
Paper clip hits the ground
Move cursor short before first impulse and
press arrow button in the timeline until the
sound level increases -> new noise source
comes up (the paper clip hits the ground)
Reduce the dynamic range to see the place of
impact
This “step by step method” is perfect for high
dynamic events e.g. S&R, for structure,
material and component tests,…
Summary of Contents for SoundCam
Page 1: ...Manual SoundCam...