CAE SimEquip, Getting Started Manual, Page: 18 / 62

Setup
18 ©2021 CAE 905K720652 v1.0
CAE SimEquip
5. Using the metal snap, secure the open flap to the back of the transport bag.
6. Attach a plastic adapterr to each of the ports.
7. Attach the filter to the port on the bag labeled EXP .
8. Attach the plastic cuff to the port on the bag labeled INSP .
9. Attach the breathing circuit limbs to the filter and cuff.
Transport Bag - Expiratory and Inspiratory Connections
10. Open the side compartment on the opposite side of the transport bag and pull the O
2
hose through the elastic opening.
11. Pull the SpO
2
probe through the same elastic opening on the right side of the bag.
12. Attach the exposed end of the O
2
hose (outside of the bag) to a simulated oxygen source.
WARNING: Never attach the hose to a real O
2
source. The medical gas hoses included
with SimEquip are intended for simulation purposes only.