CADnetwork Workstation W30, Technical Specifications

Page: 17 / 63

1-6
Chapter 1: Product Introduction
Chapter 1
Memory configurations
You may install 4 GB, 8 GB, 16 GB, and 32 GB RDIMMs; and 32 GB, and 64 GB LRDIMMs
into the DIMM sockets.
For Intel ® Skylake-W Series Processors, you may install varying memory sizes in Channel
A, Channel B, Channel C, and Channel D. The system maps the total size of the lower-
sized channel for the quad-channel configuration. Any excess memory from the higher-
sized channel is then mapped for single-channel operation.
• The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value.
• For system stability, use a more efficient memory cooling system to support a full
memory load (8 DIMMs) or overclocking condition.
• Always install the DIMMS with the same CAS Latency. For an optimum compatibility,
we recommend that you install memory modules of the same version or data code
(D/C) from the same vendor. Check with the vendor to get the correct memory
modules.
• Visit the website for the latest QVL.