CADnetwork Workstation W30, Technical Specifications

Page: 38 / 63

1-27
Chapter 1
Ensure to connect the 8-pin power plug, or connect both the 8-pin and 6-pin power plugs.
• For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a
minimum power of 350 W.
• DO NOT forget to connect the 8-pin EATX12V1/EATX12V2 power plugs. Otherwise,
the system will not boot.
• We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
• If you want to use two or more high-end PCI Express x16 cards, use a PSU with
1000W power or above to ensure the system stability, and recommend connecting the
6-pin EATX12V3 power plug.
13. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V1; 8-pin EATX12V2;
6-pin EATX12V3)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.