Cadillac XTS 2018 Owner'S Manual Download Page 42

Page: 42 / 365

Cadillac XTS Owner Manual (GMNA-Localizing-U.S./Canada-11354412) -

2018 - crc - 6/27/17

KEYS, DOORS, AND WINDOWS

Press

twice quickly on the

Remote Keyless Entry (RKE)
transmitter.

Press the emblem on the trunk
after unlocking all doors.

With the Keyless Access system
the RKE transmitter must be
within 1 m (3 ft) of the trunk for it
to be recognized. See

Remote

Keyless Entry (RKE) System
Operation

Use the handle to assist in closing the
trunk. Do not use the handle as a
tie-down.

If the vehicle is ever without power,
the trunk area can still be accessed by
folding the rear seat:

1. Fold down the rear seatback. See

Rear Seats

2. Reach inward through the

opening to locate the emergency
trunk release handle.

3. Pull the release handle to open

the trunk.

Emergency Trunk Release
Handle

Caution

Do not use the emergency trunk
release handle as a tie-down or
anchor point when securing items
in the trunk as it could damage the
handle.

Summary of Contents for XTS 2018














































































































































































































































































































































































Search results

Summary of Contents for XTS 2018

Reviews:

Related manuals for XTS 2018

Brands by name

Popular brands

Cadillac XTS 2018, Owner'S Manual

Search results

Summary of Contents for XTS 2018

Reviews:

Related manuals for XTS 2018

Brands by name

Popular brands