Cadillac XTS 2018 Owner'S Manual Download Page 290

Page: 290 / 365

Cadillac XTS Owner Manual (GMNA-Localizing-U.S./Canada-11354412) -

2018 - crc - 6/27/17

VEHICLE CARE

289

Using the Tire Sealant and
Compressor Kit without Sealant
to Inflate a Tire (Not Punctured)

To use the air compressor to inflate a
tire with air only and not sealant:

1. Selector Switch (Sealant/Air

or Air Only)

2. On/Off Button
3. Pressure Gauge
4. Pressure Deflation Button

5. Tire Sealant Canister
6. Sealant/Air Hose (Clear)
7. Air Only Hose (Black)
8. Power Plug
9. Canister Release Button

(Under Sealant/Air Hose)

If a tire goes flat, avoid further tire
and wheel damage by driving slowly
to a level place. Turn on the hazard
warning flashers. See

Hazard Warning

Flashers

153

See

If a Tire Goes Flat

282

for other

important safety warnings.

1. Remove the tire sealant and

compressor kit from its storage
location. See

Storing the Tire

Sealant and Compressor Kit

291

2. Unwrap the air only hose (7) and

the power plug (8).

3. Place the kit on the ground.

Make sure the tire valve stem is
positioned close to the ground so
the hose will reach it.

4. Remove the tire valve stem cap

from the flat tire by turning it
counterclockwise.

Summary of Contents for XTS 2018














































































































































































































































































































































































Search results

Summary of Contents for XTS 2018

Reviews:

Cadillac XTS 2018, Owner'S Manual, Page: 290 / 365

Search results

Summary of Contents for XTS 2018

Reviews: