Cadillac XT4 Owner Manual (GMNA-Localizing-Europe-15440913) - 2022 -
CRC - 5/13/21
166
INFOTAINMENT SYSTEM
Connect. If there is no mobile
phone set to First to Connect, it will
link to the mobile phone which was
used last. To link to a different
paired mobile phone, see
“
Linking to
a Different Phone
”
later in this
section.
Pairing a Phone
1. Make sure Bluetooth has been
enabled on the mobile phone
before the pairing process is
started.
2. Touch the Phone icon on the Home
Page or the phone icon on the
shortcut tray near the bottom of
the display.
3. Touch Phones at the top of the
infotainment display. There is also
a Connect Phones option in the
middle of the Phone display which
will shortcut to the Phone
List menu.
4. Touch Add Phone.
5. Select the vehicle name shown on
the infotainment display from your
mobile phone's Bluetooth
Settings list.
6. Follow the instructions on the
mobile phone to confirm the
six-digit code showing on the
infotainment display and touch
Pair. The code on the mobile phone
and infotainment display will need
to be acknowledged for a successful
pairing.
7. Start the pairing process on the
mobile phone to be paired to the
vehicle. See the mobile phone
manufacturer's user guide for
information on this process. Once
the mobile phone is paired, it will
show under Connected.
8. If the vehicle name does not
appear on your mobile phone, there
are a few ways to restart the
pairing process:
.
Turn the mobile phone off and
then back on.
.
Go back to the beginning of the
Phone menus on the
infotainment display and restart
the pairing process.
.
Reset the mobile phone, but this
step should be done as a last
effort.
9. If the mobile phone prompts to
accept connection or allow phone
book download, touch Always
Accept and Allow. The phone book
may not be available if not
accepted.
10. Repeat Steps 1
−
8 to pair additional
mobile phones.
First to Connect Paired Phones
If multiple paired mobile phones are
within range of the system, the
system connects to the paired mobile
phone that is set as First to Connect.
To enable a paired mobile phone as
the First to Connect phone:
1. Make sure the mobile phone is
turned on.
2. Touch Settings, then touch System.
3. Touch Phones to access all paired
and all connected mobile phones
and mobile devices.
4. Touch the information icon to the
right of the mobile phone to open
the mobile phone's settings menu.
5. Touch the First to Connect option,
to enable the setting for that
device.