Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
•
G
Turn and Lane-Change Signals. See
and Lane-Change Signals on page 3-7
.
•
3
Headlamp High/Low-Beam Changer. See
Headlamp High/Low-Beam Changer on page 3-8
.
•
-
Fog Lamps. See
Fog Lamps on page 3-31
.
•
Flash-to-Pass Feature. See
page 3-8
.
•
I
Cruise Control. See
page 3-12
.
•
P
Exterior Lamps Control. See
on page 3-28
.
Turn and Lane-Change Signals
The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
To signal a turn, move the multifunction lever all the
way up or down. When the turn is finished, the lever will
return automatically.
An arrow on the instrument
panel cluster will flash in
the direction of the
turn or lane change.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by itself
when you release it.
If you signal a turn or a lane change and the arrows
flash faster than normal, a signal bulb may be burned
out. Other drivers will not see the turn signal.
Replace burned-out bulbs to help avoid possible
accidents. If the arrows do not go on at all when you
signal a turn, check the fuses and check for burned-out
bulbs. See
Fuses and Circuit Breakers on page 6-86
.
3-7
Summary of Contents for XLR-V 2006
