Cadillac STS 2007, Manual

Page: 122 / 162

Voice Recognition
The navigation system’s voice recognition allows
for hands-free operation of navigation, phone,
audio system, climate controls, windows, OnStar
®
,
and memory features. Voice recognition can be
used when the ignition is on or when Retained
Accessory Power (RAP) is active. See “Retained
Accessory Power (RAP)” in the Index of your
vehicle’s owner manual for more information.
To use voice recognition, do the following:
1. Press the talk
symbol steering
wheel control
and release it when
you hear a beep.
The audio system, if
on, will mute.
When you are in the navigation screens, the
system will display a symbol (
|
) while the
voice recognition is active.
2. Clearly state one of the commands listed on
the following pages.
Helpful Hints for Stating Commands
•
When a multiple command is available, choose
the command that best works for you.
•
Words that are in brackets are optional. For
example, for the command Radio [band]
[select] FM, stating Radio FM or Radio select
FM are both valid commands.
•
When the system recognizes the command
the system will:
− Either perform the function
− Ask you to confirm your choice by clearly
stating “yes or no”
− Issue an error message such as “System
does not recognize this command” or
direct you to “Please start speaking after
the beep”
•
If the system is not yet ready, the system
may state “System is checking the disc.
Please wait.”.
•
To cancel a command or if the system
response does not match your verbal
command, press and hold the talk symbol
button. The system will reply, “System
will cancel the voice recognition”.
122