If a tire goes flat, avoid further tire and wheel damage
by driving slowly to a level place and stopping. Then
do this:
1. Turn on the hazard warning flashers. See “Hazard
Warning Flashers” in the Index of the owner
manual.
2. Park the vehicle. Set the parking brake firmly and
put the shift lever in P (Park).
3. Turn off the engine.
4. Inspect the flat tire.
If the tire has been separated from the wheel, has
damaged sidewalls, or has a puncture larger than a
1
⁄
4
inch (6 mm), the tire is too severely damaged for the
tire sealant and compressor kit to be effective. See
“Roadside Service” in the Index of the owner manual.
If the tire has a puncture less than a
1
⁄
4
inch (6 mm)
in the tread area of the tire, see Tire Sealant and
Compressor Kit (Without Selector Switch) on page 5-32
or Tire Sealant and Compressor Kit (With Selector
Switch) on page 5-40.
Changing a Flat Tire
If a tire goes flat, avoid further tire and wheel damage
by driving slowly to a level place. Turn on the hazard
warning flashers.
{
CAUTION:
Changing a tire can be dangerous. The vehicle
can slip off the jack and roll over or fall on you or
other people. You and they could be badly injured
or even killed. Find a level place to change your
tire. To help prevent the vehicle from moving:
1. Set the parking brake firmly.
2. Put the shift lever in P (Park).
CAUTION:
(Continued)
5-30
Summary of Contents for Escalade Two-mode Hybrid 2009
Page 30: ... NOTES 3 10 ...
Page 40: ... NOTES 4 10 ...
Page 44: ...Engine Compartment Overview When you open the hood on your vehicle you will see 5 4 ...
Page 92: ... NOTES 5 52 ...
