{
CAUTION:
You can be burned if you spill coolant on hot
engine parts. Coolant contains ethylene glycol and
it will burn if the engine parts are hot enough. Do
not spill coolant on a hot engine.
If the DMCM coolant is empty, the vehicle must be
serviced by your dealer and a special fill procedure must
be followed.
Notice: Attempting to fill the DMCM cooling surge
tank yourself when the fluid level is empty can
damage your vehicle. Your vehicle must be serviced.
1. Park the vehicle on a level surface and turn the
vehicle off. Remove the DMCM coolant surge
tank pressure cap when the DMCM cooling system,
including the DMCM coolant surge tank pressure
cap and DMCM cooling hoses, are no longer
hot. Turn the DMCM coolant surge tank pressure
cap slowly counterclockwise (left) about one
full turn. Wait 30 seconds.
5-9
Summary of Contents for Escalade Two-mode Hybrid 2009
Page 30: ... NOTES 3 10 ...
Page 40: ... NOTES 4 10 ...
Page 44: ...Engine Compartment Overview When you open the hood on your vehicle you will see 5 4 ...
Page 92: ... NOTES 5 52 ...