Cadillac Escalade ESV 2014 Owner'S Manual Download | Manualshive

Page: 38 / 508

background image

Black plate (10,1)

Cadillac Escalade/Escalade ESV Owner Manual (GMNA-Localizing-U.S./

Canada/Mexico-6081529) - 2014 - CRC 1st Edition - 4/23/13

2-10

Keys, Doors, and Windows

{

Warning

You, or others, could be injured if
caught in the path of the power
liftgate. Make sure there is no one
in the way of the liftgate as it is
opening and closing.

There are several ways to open and
close the power liftgate:

.

Press and hold

8

on the RKE

transmitter until the liftgate starts
moving.

.

Press

8

on the overhead

console.

.

Press

l

on the bottom of the

liftgate next to the latch to close.

Pressing a second time while the
liftgate is moving reverses the
direction.

To disable the power liftgate
function, press OFF on the liftgate
switch.

The power liftgate may be
temporarily disabled under extreme
temperatures, or under low battery
conditions. If this occurs, the liftgate
can still be operated manually.

If the transmission is shifted out of P
(Park) while the power function is in
progress, the liftgate power function
will continue to completion. If the
transmission is shifted out of P
(Park) and the vehicle accelerates
before the power liftgate latches
closed, the liftgate may reverse to
the open position. Cargo could fall
out of the vehicle. Always make
sure the power liftgate is closed and
latched before driving away.

If the liftgate is opened using power
operation and the liftgate support
struts have lost pressure, the turn
signals flash and a chime will
sound. The liftgate stays open
temporarily, and then slowly closes.
See a dealer for service before
using the liftgate.

Obstacle Detection Features

If the liftgate encounters an obstacle
during a power open or close cycle,
a warning chime will sound and the
liftgate will automatically reverse
direction to the full closed or open
position. After removing the
obstruction, the power liftgate
operation can be used again. If the
liftgate encounters multiple
obstacles on the same power cycle,
the power function will deactivate
and a message will display in the
Driver Information Center (DIC).
See

Object Detection System

Messages on page 5-31

. After

removing the obstructions, the
liftgate will resume normal power
operation.

Pinch sensors are located on the
side edges of the liftgate. If an
object is caught between the liftgate
and the vehicle and presses against
this sensor, the liftgate will reverse
direction and open fully. The liftgate
will remain open until it is activated
again or closed manually.

«
...
36
37
38
39
40
...
»

Summary of Contents for Escalade ESV 2014





























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade ESV 2014

SP200 - QUICKSTART GUIDE 1

Brand: Jabra Pages: 2

BT150 - Headset - Over-the-ear

Brand: Jabra Pages: 2

Brand: Dacia Pages: 238

Brand: Whispbar Pages: 85

2010 Civic Sedan

Brand: Honda Pages: 390

2011 SRX CROSSOVER

Brand: Cadillac Pages: 416

Brand: TIE DOWN Pages: 2

Interlock 700 Series

Brand: Scania Pages: 82

TX-STAMP-4-TC01

Brand: Over Armour Offroad Pages: 4

Brand: Blueant Pages: 37

Brand: Ford Pages: 541

PRO-YD-DR02 Series

Brand: Spyder Auto Pages: 3

Eliminator 73180

Brand: Power Wheels Pages: 36

Brand: Axxess Pages: 24

Brand: wikango Pages: 64

Brand: Volkswagen Pages: 3

1987 Vanagon Westfalia Camper

Brand: Volkswagen Pages: 28

Golf Variant 2007

Brand: Volkswagen Pages: 127

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands