Cadillac Escalade ESV 2014 Owner'S Manual Download

Page: 20 / 508

Black plate (14,1)

Cadillac Escalade/Escalade ESV Owner Manual (GMNA-Localizing-U.S./

Canada/Mexico-6081529) - 2014 - CRC 1st Edition - 4/23/13

1-14

In Brief

control to the off position again will
turn the automatic headlamps and
DRL back on.

For vehicles first sold in Canada,
the off position only works when the
vehicle is shifted into the P (Park)
position.

AUTO:

Automatically turns on the

headlamps at normal brightness,
along with the parking lamps,
instrument panel lights, license plate
lamps, and taillamps.

;

Turns on the parking lamps,

along with the instrument panel
lights, license plate lamps, and
taillamps.

Turns on the headlamps,

parking lamps, instrument panel
lights, license plate lamps, and
taillamps.

See:

Exterior Lamp Controls on
page 6-1

Daytime Running Lamps (DRL)
on page 6-5

Fog Lamps on page 6-7

Windshield Wiper/Washer

Turn the band with the wiper symbol
to control the windshield wipers.

For a single wipe, turn to

then release. For several wipes,
hold the band on

longer.

(

Turns the windshield wipers off.

Turn the band up for more

frequent wipes or down for less
frequent wipes.

Slow wipes.

Fast wipes.

Push the paddle at the top of

the lever to spray washer fluid on
the windshield.

Rear Wiper Window Wiper/Washer

To turn the rear wiper on, slide the
lever to a wiper position.

(

Turns the wiper off.

Turns on the rear wiper delay.

Turns on the rear wiper.

Press the button on the end of

the lever to spray washer fluid on
the rear window.

See

Windshield Wiper/Washer on

page 5-3

and

Rear Window Wiper/

Washer on page 5-4

Summary of Contents for Escalade ESV 2014





























































































































































































































































































































































































































































































































Search results

Summary of Contents for Escalade ESV 2014

Reviews:

Related manuals for Escalade ESV 2014

Brands by name

Popular brands

Cadillac Escalade ESV 2014, Owner'S Manual

Search results

Summary of Contents for Escalade ESV 2014

Reviews:

Related manuals for Escalade ESV 2014

Brands by name

Popular brands