Cadillac Escalade ESV 2014 Owner'S Manual Download | Manualshive

Page: 299 / 508

background image

Black plate (11,1)

Cadillac Escalade/Escalade ESV Owner Manual (GMNA-Localizing-U.S./

Canada/Mexico-6081529) - 2014 - CRC 1st Edition - 4/23/13

Driving and Operating

9-11

There is no hard and fast rule about
hydroplaning. The best advice is to
slow down when the road is wet.

Other Rainy Weather Tips

Besides slowing down, other wet
weather driving tips include:

.

Allow extra following distance.

.

Pass with caution.

.

Keep windshield wiping
equipment in good shape.

.

Keep the windshield washer fluid
reservoir filled.

.

Have good tires with proper
tread depth. See

.

.

Turn off cruise control.

Highway Hypnosis

Always be alert and pay attention to
your surroundings while driving.
If you become tired or sleepy, find a
safe place to park the vehicle
and rest.

Other driving tips include:

.

Keep the vehicle well ventilated.

.

Keep the interior
temperature cool.

.

Keep your eyes moving

—

scan

the road ahead and to the sides.

.

Check the rearview mirror and
vehicle instruments often.

Hill and Mountain Roads

Driving on steep hills or through
mountains is different than driving
on flat or rolling terrain. Tips for
driving in these conditions include:

.

Keep the vehicle serviced and in
good shape.

.

Check all fluid levels and brakes,
tires, cooling system, and
transmission.

.

Shift to a lower gear when going
down steep or long hills.

{

Warning

If you do not shift down, the
brakes could get so hot that they
would not work well. You would
then have poor braking or even
none going down a hill. You could
crash. Shift down to let the engine
assist the brakes on a steep
downhill slope.

{

Warning

Coasting downhill in N (Neutral)
or with the ignition off is
dangerous. The brakes will have
to do all the work of slowing down
and they could get so hot that
they would not work well. You
would then have poor braking or
even none going down a hill.
Steering may also be affected
when ignition is off. You could

(Continued)

«
...
297
298
299
300
301
...
»

Summary of Contents for Escalade ESV 2014





























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade ESV 2014

Brand: PAC Pages: 15

Brand: Quadratec Pages: 8

Brand: Camcar Pages: 2

Brand: DEFA Pages: 9

Slim Line LED Light Grille Kit

Brand: rough country Pages: 8

Brand: Yakima Pages: 19

UCI-11C NTV-KIT331

Brand: Nav TV Pages: 4

Brand: PullRite Pages: 10

DAF CHARGEMAX 90

Brand: Paccar Pages: 40

Brand: Yakima Pages: 13

Brand: Thule Pages: 12

Brand: Streetwize Pages: 4

Brand: A-Tach Mounts Pages: 2

Brand: Toyota Pages: 779

Brand: Reliant Pages: 116

Brand: Lock'er Down Pages: 2

Brand: Kuda-Phonebase Pages: 3

LockNLoad LightenUp

Brand: Yakima Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands