Cadillac Escalade Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
13690472) - 2021 - CRC - 5/15/20
244
DRIVING AND OPERATING
To maintain vehicle performance,
other conditions may cause the engine
to automatically restart before the
brake pedal is released.
Auto Stops may not occur and/or Auto
Starts may occur because:
.
The climate control settings require
the engine to be running to cool or
heat the vehicle interior.
.
The vehicle battery charge is low.
.
The vehicle battery has recently
been disconnected.
.
Minimum vehicle speed has not
been reached since the last
Auto Stop.
.
The accelerator pedal is pressed.
.
The engine or transmission is not at
the required operating temperature.
.
The outside temperature is not in
the required operating range.
.
The vehicle is shifted out of D
(Drive) to any gear other than
P (Park).
.
Certain driver modes have been
selected. See
and
.
.
The vehicle is on a steep hill or
grade.
.
The driver door has been opened or
the driver seat belt has been
unbuckled.
.
The hood has been opened.
.
The Auto Stop has reached the
maximum allowed time.
Auto Stop Disable Switch
Uplevel Shown, Others Similar
The automatic engine Stop/Start
feature can be disabled and enabled
by pressing
h
. Auto Stop is enabled
each time you start the vehicle.
When
h
is illuminated, the system is
enabled.
Retained Accessory
Power (RAP)
When the ignition is turned from on
to off, the following features (if
equipped) will continue to function
for up to 10 minutes, or until the
driver door is opened. These features
will also work when the ignition is in
RUN or ACC/ACCESSORY:
.
Infotainment System
.
Power Windows (during RAP this
functionality will be lost when any
door is opened)
.
Sunroof (during RAP this
functionality will be lost when any
door is opened)
.
Auxiliary Power Outlet
.
Audio System
.
OnStar System
Shifting Into Park
To shift into P (Park):
1. Hold the brake pedal down and set
the parking brake. See
.