manualshive.com logo in svg

Cadillac Escalade 2018, Owner'S Manual

The Cadillac Escalade 2018 Owner's Manual is a comprehensive resource providing detailed instructions and guidance for owners of this luxurious SUV. Available for free download at manualshive.com, this comprehensive manual equips you with all the necessary information to optimize your Escalade experience.

Share
Download
background image

Cadillac Escalade Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

11349344) - 2018 - crc - 6/21/17

SEATS AND RESTRAINTS

93

2. Remove any additional material

from the seat, such as blankets,
cushions, seat covers, seat
heaters, or seat massagers.

3. Place the seatback in the fully

upright position.

4. Have the person sit upright in

the seat, centered on the seat
cushion, with legs comfortably
extended.

5. If the shoulder portion of the

belt is pulled out all the way, the
child restraint locking feature
will be engaged. This may
unintentionally cause the
passenger sensing system to turn
the airbag off for some
adult-sized occupants. If this
happens, unbuckle the belt, let
the belt go back all the way, and
then buckle the belt again
without pulling the belt out all
the way.

6. Restart the vehicle and have the

person remain in this position
for two to three minutes after the
on indicator is lit.

{

Warning

If the front outboard passenger
airbag is turned off for an
adult-sized occupant, the airbag will
not be able to inflate and help
protect that person in a crash,
resulting in an increased risk of
serious injury or even death. An
adult-sized occupant should not
ride in the front outboard passenger
seat, if the passenger airbag off
indicator is lit.

Additional Factors Affecting
System Operation

Seat belts help keep the passenger in
position on the seat during vehicle
maneuvers and braking, which helps
the passenger sensing system
maintain the passenger airbag status.
See

“

Seat Belts

”

and

“

Child Restraints

”

in the Index for additional
information about the importance of
proper restraint use.

A thick layer of additional material,
such as a blanket or cushion,
or aftermarket equipment such as seat

covers, seat heaters, and seat
massagers can affect how well the
passenger sensing system operates.
We recommend that you not use seat
covers or other aftermarket equipment
except when approved by GM for your
specific vehicle. See

Adding Equipment

to the Airbag-Equipped Vehicle

0

94

for

more information about modifications
that can affect how the system
operates.

The on indicator may be lit if an
object, such as a briefcase, handbag,
grocery bag, laptop, or other electronic
device, is put on an unoccupied seat.
If this is not desired, remove the
object from the seat.

{

Warning

Stowing articles under the
passenger seat or between the
passenger seat cushion and
seatback may interfere with the
proper operation of the passenger
sensing system.

Summary of Contents for Escalade 2018









































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade 2018

Fab Fours BLACK STEEL S2560 Installation Instructions Manual preview
BLACK STEEL S2560
Brand: Fab Fours Pages: 9
Paxton Automotive Novi Owner'S Installation Manual preview
Novi
Brand: Paxton Automotive Pages: 85
Thule 1489 Instructions Manual preview
1489
Brand: Thule Pages: 8
FORM FIT HDW 1779 Installation Instructions preview
HDW 1779
Brand: FORM FIT Pages: 2
AA Products RB0007 Instruction Manual preview
RB0007
Brand: AA Products Pages: 6
FALCON RIDGE HO-P500-FC04 Instructions For Installation And Care preview
HO-P500-FC04
Brand: FALCON RIDGE Pages: 8
Scosche 142HUD2 Manual preview
142HUD2
Brand: Scosche Pages: 8
GMC 2010 Tahoe Owner'S Manual preview
2010 Tahoe
Brand: GMC Pages: 120
Prime Tech H-066 User Manual preview
H-066
Brand: Prime Tech Pages: 6
Hudson 1933 Eight Owner'S Manual preview
1933 Eight
Brand: Hudson Pages: 34
Yakima LowRider Manual preview
LowRider
Brand: Yakima Pages: 15
TAUBENREUTHER 16-5911 Manual preview
16-5911
Brand: TAUBENREUTHER Pages: 18
J. Strong JST506BT Installation Instructions preview
JST506BT
Brand: J. Strong Pages: 2
Conrad 85 51 49 Operating Instructions Manual preview
85 51 49
Brand: Conrad Pages: 50
Ford Escape 2022 Owner'S Manual preview
Escape 2022
Brand: Ford Pages: 585
RAM 1500 CLASSIC 2020 Owner'S Manual preview
1500 CLASSIC 2020
Brand: RAM Pages: 360
Honda 2000 Accord Sedan Online Reference Owner'S Manual preview
2000 Accord Sedan
Brand: Honda Pages: 320
Pogo Alert+ Operating Instructions Manual preview
Alert+
Brand: Pogo Pages: 40

Brands by name

Popular brands

Load more brands