Cadillac Escalade 2018 Owner'S Manual Download Page 250 | Manualshive

Page: 250 / 392

background image

Cadillac Escalade Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-

11349344) - 2018 - crc - 6/21/17

DRIVING AND OPERATING

249

Driving on Grades

Reduce speed and shift to a lower gear

before

starting down a long or steep

downgrade. If the transmission is not
shifted down, the brakes might get hot
and no longer work well.

Vehicles can tow in D (Drive). Shift
the transmission to a lower gear if the
transmission shifts too often under
heavy loads and/or hilly conditions.

When towing, use the Tow/Haul Mode
to prevent damage to the engine or
transmission. See

Tow/Haul Mode

.

When towing at high altitude on steep
uphill grades, consider the following:
Engine coolant will boil at a lower
temperature than at normal altitudes.
If the engine is turned off immediately
after towing at high altitude on steep
uphill grades, the vehicle may show
signs similar to engine overheating. To
avoid this, let the engine run while
parked, preferably on level ground,
with the transmission in P (Park) for a
few minutes before turning the engine
off. If the overheat warning comes on,
see

Engine Overheating

Parking on Hills

{

Warning

Parking the vehicle on a hill with
the trailer attached can be
dangerous. If something goes
wrong, the rig could start to move.
People can be injured, and both the
vehicle and the trailer can be
damaged. When possible, always
park the rig on a flat surface.

If parking the rig on a hill:

1. Press the brake pedal, but do not

shift into P (Park) yet. Turn the
wheels into the curb if facing
downhill or into traffic if facing
uphill.

2. Have someone place chocks

under the trailer wheels.

3. When the wheel chocks are in

place, release the regular brakes
until the chocks absorb the load.

4. Reapply the brake pedal. Then

apply the parking brake and shift
into P (Park).

5. Release the brake pedal.

Leaving After Parking on a Hill

1. Apply and hold the brake pedal.

2. Start the engine.

3. Shift into a gear.

4. Release the parking brake.

5. Let up on the brake pedal.

6. Drive slowly until the trailer is

clear of the chocks.

7. Stop and have someone pick up

and store the chocks.

Maintenance when Trailer
Towing

The vehicle needs service more often
when pulling a trailer. See

Maintenance Schedule

. Things

that are especially important in trailer
operation are automatic transmission
fluid, engine oil, axle lubricant, belts,
cooling system, and brake system. It is
a good idea to inspect these before
and during the trip.

Check periodically to see that all hitch
nuts and bolts are tight.

«
...
248
249
250
251
252
...
»

Summary of Contents for Escalade 2018









































































































































































































































































































































































































Reviews:

No comments

Related manuals for Escalade 2018

Brand: JAC Pages: 70

Brand: Toyota Pages: 529

Brand: FORM FIT Pages: 2

Edge Flush Rail

Brand: Thule Pages: 12

Brand: Thule Pages: 8

Brand: Metra Electronics Pages: 2

Brand: Carcomm Pages: 2

Brand: APS Pages: 3

Brand: Prorack Pages: 15

Brand: Pontiac Pages: 486

Brand: Aston Martin Pages: 415

Brand: Prorack Pages: 14

Brand: Yenkee Pages: 22

Halo Pole Mount

Brand: Charge Amps Pages: 14

Full Display Mirror

Brand: Gentex Pages: 18

Brand: Datsun Pages: 104

Brand: Fortin Electronic Systems Pages: 5

ASENTO EV-EXP18R

Brand: ADAPT SOLUTIONS Pages: 25

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands