Cadillac ATS 2013, Owner'S Manual

Page: 260 / 326

Black plate (24,1)
Cadillac ATS (Europe) - 2013 - crc - 10/8/12
10-24 Vehicle Care
Bulb Replacement
For the proper type of replacement
bulbs, see
Replacement Bulbs on
page 10 ‑ 25 .
For any bulb-changing procedure
not listed in this section, contact
your dealer.
Halogen Bulbs
{
WARNING
Halogen bulbs have pressurised
gas inside and can burst if you
drop or scratch the bulb. You or
others could be injured. Be sure
to read and follow the instructions
on the bulb package.
High Intensity Discharge
(HID) Lighting
{
WARNING
The high intensity discharge
lighting system operates at a very
high voltage. If you try to service
any of the system components,
you could be seriously injured.
Have your dealer or a qualified
technician service them.
After an HID headlamp bulb has
been replaced, the beam might be a
slightly different shade than it was
originally. This is normal.
LED Lighting
This vehicle has several LED lamps.
For replacement of any LED lighting
assembly, contact your dealer.
Back-Up Lamps
1. Reversing Bulb Socket
2. Reversing Lamp Assembly
To replace one of these bulbs:
1. Reach under the rear fascia and
locate the reversing lamp
assembly.
2. Remove the bulb socket (1) by
turning anticlockwise and pulling
straight out of the lamp
assembly (2).
3. Pull the bulb out of the socket.