Cadillac ATS 2013, Owner'S Manual

Page: 232 / 326

Black plate (58,1)
Cadillac ATS (Europe) - 2013 - crc - 10/8/12
9-58 Driving and Operating
When the vehicle is started, the
LDW indicator on the instrument
cluster will come on briefly.
If LDW is on, the LDW indicator will
appear green if the system detects
a left or right lane marking while the
vehicle is travelling at 56 km/h (35
mph) or greater. If the vehicle
crosses a detected lane marking
without using the indicator, this
indicator will change to amber and
flash. In addition, three beeps will
sound from the left or right, or the
Safety Alert Seat will pulse three
times on either the left or right side
of the seat, depending on the lane
departure direction.
When the System Does Not
Seem to Work Properly
If the system is on and the vehicle is
travelling 56 km/h (35 mph) or
greater, and LDW symbol does not
appear:
.
The lane markings on the road
may not be seen.
. The camera sensor may be
blocked by dirt, snow, or ice.
. The windscreen may be
damaged.
. The weather may be limiting
visibility.
This is normal operation; the vehicle
does not need service. Clean the
windscreen.
Lane markings may not be detected
on bends, motorway exit ramps,
or hills; or due to poor visibility.
If the LDW camera system does not
seem to operate properly, cleaning
the outside of the windscreen in
front of the camera sensor may
correct the issue.
{
WARNING
If the LDW camera sensor is
blocked by dirt, snow, or ice, or if
the headlamps are not cleaned or
properly aimed, or if the
windscreen is dirty or damaged, it
may not detect the lanes ahead.
LDW may not help avoid a crash
under these conditions. Keep the
headlamps cleaned and properly
aimed and the windscreen clean.
LDW warnings may occur due to tar
marks, shadows, cracks in the road,
or other road imperfections. This is
normal system operation; the
vehicle does not need service.