Pairing
Pairing varies among devices but basic steps are the same. This process is done
upon initial install and will not have to be repeated.
1.
Turn Ignition and radio
“ON”
LED inside module peephole will flash (pairing mode)
2.
Go to device:
Settings, Wireless & Networks, Bluetooth Settings
3.
Select
Bluetooth
and turn on.
4.
Tap
Scan for devices
.
5.
Wait for Bluetooth device name to appear and tap it. (See below)
LED inside module peephole will glow steady (paired)
Operation
1.
Turn ignition and r
adio “ON”
2.
Press “
BAND
” button until XM1 or XM2 is displayed
3.
Launch smartphone or tablet audio application.
4.
Use radio volume control button to set playback level.
Warning:
Use smartphone built-in controls or optional wireless
remote to control audio files or applications
5.
If correct operation is confirmed go ahead and reinstall radio.
6.
XM subscribers
:
1.
To listen to XM:
Press “BAND” button on radio
and
disable Bluetooth
on audio device.
You are now in XM mode. Operate XM from radio button as customary.
2.
To resume streaming
Re-enable Bluetooth in audio device settings screen.
Note:
Streaming has priority and remains until disabled. XM playback
(if subscribed) is only possible when Bluetooth is disabled or device is
out of range.
Note:
If XM has expired with plans to renew at a future date; you must
purchase “
Subscribed
” version otherwise XM will not play upon activation.