Cadillac 2016 CT6 Owner'S Manual Download Page 27 | Manualshive

Page: 27 / 397

background image

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-9235592) -

2016 - crc - 11/6/15

26

In Brief

.

To turn off both TCS and
StabiliTrak, press and hold

Y

on the center console until

g

and

i

illuminate in the

instrument cluster. The
appropriate DIC message
displays. See

Ride Control

System Messages

0

154

.

.

Press and release

Y

again to

turn on both systems.

See

Traction Control/Electronic

Stability Control

0

217

.

The vehicle has Driver Mode
Control. See

Driver Mode

Control

0

219

.

Tire Pressure Monitor

This vehicle may have a Tire
Pressure Monitor System (TPMS).

The low tire pressure warning light
alerts to a significant loss in
pressure of one of the vehicle's
tires. If the warning light comes on,
stop as soon as possible and inflate
the tires to the recommended
pressure shown on the Tire and
Loading Information label. See

Vehicle Load Limits

0

198

. The

warning light will remain on until the
tire pressure is corrected.

The low tire pressure warning light
may come on in cool weather when
the vehicle is first started, and then
turn off as the vehicle is driven. This
may be an early indicator that the
tire pressures are getting low and
the tires need to be inflated to the
proper pressure.

The TPMS does not replace normal
monthly tire maintenance. Maintain
the correct tire pressures.

See

Tire Pressure Monitor

System

0

308

.

Engine Oil Life System

The engine oil life system calculates
engine oil life based on vehicle use
and displays the CHANGE ENGINE
OIL SOON message when it is time
to change the engine oil and filter.
The oil life system should be reset
to 100% only following an oil
change.

Resetting the Oil Life System

1. Using the DIC buttons, display

REMAINING OIL LIFE on the
DIC. See

Driver Information

Center (DIC)

0

140

and

Engine

Oil Messages

0

149

.

2. Press and hold SEL to clear

the CHANGE ENGINE OIL
SOON message and reset the
oil life at 100%.

Be careful not to reset the oil
life display accidentally at any
time other than after the oil is
changed. It cannot be reset
accurately until the next oil
change.

«
...
25
26
27
28
29
...
»

Summary of Contents for 2016 CT6














































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2016 CT6

Brand: Uebler Pages: 18

FleetMaster Air FW8 Series

Brand: SAF-HOLLAND Pages: 20

autoSteady AS101

Brand: Enduro Pages: 48

Brand: Webasto Pages: 34

Brand: ULTIMATE SPEED Pages: 21

RUDDER ANGLE INDICATOR

Brand: VDO Pages: 8

Brand: Chevrolet Pages: 372

TX-STAMP-4-FC04

Brand: Over Armour Offroad Pages: 9

Brand: Tesla Pages: 274

Brand: Aston Martin Pages: 415

Brand: Volvo Pages: 62

Brand: Buick Pages: 112

PRIME DESIGN UXV 211

Brand: Safe Fleet Pages: 8

Brand: 3SIXT Pages: 4

Brand: Yakima Pages: 14

Brand: Pacbrake Pages: 2

2012 ODYSSEY EX

Brand: Honda Pages: 13

Brand: AirBedz Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands