Cadillac 2016 CT6 Owner'S Manual Download Page 289

Page: 289 / 397

Cadillac CT6 Owner Manual (GMNA-Localizing-U.S./Canada-9235592) -

2016 - crc - 11/6/15

288

Vehicle Care

Bulb Replacement

For the proper type of replacement
bulbs, see

Replacement

Bulbs

289

For any bulb-changing procedure
not listed in this section, contact
your dealer.

LED Lighting

This vehicle has several LED lamps.
For replacement of any LED lighting
assembly not listed here, contact
your dealer.

License Plate Lamp

Lamp Assembly

To replace one of these lamps:

1. Push the lamp assembly

toward the center of the
vehicle.

2. Pull the lamp assembly down

to expose the LED connector.

3. Pull the retaining tab on the

LED connector up to release
the lamp assembly. Remove
the lamp assembly.

4. Install the new lamp assembly

on the LED connector. Push in
the retaining tab to lock in
place.

5. Push the lamp assembly back

into position until the release
tab locks into place.

Summary of Contents for 2016 CT6














































































































































































































































































































































































































Search results

Summary of Contents for 2016 CT6

Reviews:

Related manuals for 2016 CT6

Brands by name

Popular brands

Cadillac 2016 CT6, Owner'S Manual

Search results

Summary of Contents for 2016 CT6

Reviews:

Related manuals for 2016 CT6

Brands by name

Popular brands